Black Friday - For the Bike

Small enough to take on all your road trips, these pack into a built-in self-storing pocket about the size of your hand. Overall, it’s half the size of the next smallest full-coverage cover because it’s made from a thinner, lighter fabric. The strong opaque 2 oz siliconized ripstop nylon is plenty tough and keeps water and dust off your bike... it’s widely used in parachutes, sailboat spinnakers, kites and skysails.

The integrated elastic cinch cord tightly snugs all covers close to your bike so it won’t blow off during a breeze, and additional grommets allow for further binding or tying down. The Aerostich label is purposefully placed at the front bottom center, right on the hem, so it’s easy to find the front of the cover.

For improving overnight security at the seediest, darkest motel parking lot, the self-storing pocket on the hem of the cover also doubles as a portable battery powered motion-detecting alarm holder, to scare the pants off of whoever wants to take a peak at what’s below.

Large size covers loaded GS1100’s, Gold Wings and other dreadnought sized machines. Medium fits all sportbikes, standards, dual sports, and sport touring bikes with smaller windshields. Small fits scooters. Seat Saver model fits all bikes, covering vital areas of instrument pod, handlebars, gas tank and seat. Black.

Made from 2oz/sq yd silicone coated Cordura® 33d ripstop nylon.

Total overall dimensions:
Large #1735 - Length 177.5" x Width 136"
Medium #1733 - Length 154.5" x Width 129.5"
Small #1738 - Length 150" x Width 120"

Other Reviews

Editorial, Field Tested: Aerostich Ultralight Bike Cover

Additional Information/Resources:

Small enough to take on all your road trips, these pack into a built-in self-storing pocket about the size of your hand. Overall, it’s half the size of the next smallest full-coverage cover because it’s made from a thinner, lighter fabric. The strong opaque 2 oz siliconized ripstop nylon is plenty tough and keeps water and dust off your bike... it’s widely used in parachutes, sailboat spinnakers, kites and skysails.

The integrated elastic cinch cord tightly snugs all covers close to your bike so it won’t blow off during a breeze, and additional grommets allow for further binding or tying down. The Aerostich label is purposefully placed at the front bottom center, right on the hem, so it’s easy to find the front of the cover.

For improving overnight security at the seediest, darkest motel parking lot, the self-storing pocket on the hem of the cover also doubles as a portable battery powered motion-detecting alarm holder, to scare the pants off of whoever wants to take a peak at what’s below.

Seat Saver model fits all bikes, covering vital areas of instrument pod, handlebars, gas tank and seat. Black.

Made from 2oz/sq yd silicone coated Cordura® 33d ripstop nylon.

Editorial, Field Tested: Aerostich Ultralight Bike Cover

Sheepskin cushions, cools and lets air circulate. When it’s sticky hot, you’ll sit cooler. And when it’s freezing, sheepskin is warm and comfy. Between extremes it’s always luxurious. Sheepskin has long been used by those who sit for extended periods because of how it cushions and vents.

These are luxurious top grade sheepskins, laminated with an Aerostich-exclusive, non-skid 3⁄16" PVC foam mesh base, so they won’t creep around on your saddle, even if you ride aggressively. They also won’t hold or absorb much water. Saddle sheepskin pads help you stay more comfortable, refreshed and alert on long rides. Each pad features eight strategic bungee attachment points, two lengths of adjustable bungee, and four no-scratch nylon hooks for a custom installation. Made in America.

Note: Not recommended for use on leather saddles.

Additional Information:

Whip it out for high performance on hot asphalt. The CFSP looks and works better than a flattened can, which is never around when you need one anyway. Stiff and light, the Carbon Fiber Sidestand Plate is about the same dimensions as a pack of cigs (but thin), so it will fit into your pocket with room to spare. Included is a natty Aerostich Ultrasuede carrying sleeve that protects you from earthen parking lot dirt. The sleeve may be attached to the inside of your bike’s fairing so it’s always at the ready. 4"×2.5.

‘Hey Rocky, watch me pull a poodle outta my hat…Rocky? Rock…AHHHH someone squished my squirrel friend under a motorcycle!’ These ‘roadkill’ kritters keep the bike upright with style. A durable 4" disk sidestand insert keeps the kickstand from melting into hot asphalt or sinking into soft dirt. Furry fabric is fully washable…or not, if a real road-grimed appearance is desired. A functional, furry mascot for the next parking lot, roadside stop or rally. Choose Zombie or Pancake Poodle. Approximately 9"×7"× Flat.

If you’ve ever encountered the charmingly termed “evaporative recovery nozzles” at gas stations, you know what a semi-spastic wrestling match with one of these flammable-spewing horses appendages can be like. All you’re trying to do is refuel your motorcycle, right? However, for those of us so afflicted, this nozzle key artfully retracts the corrugated... forepart of said alloy proboscis and allows you to gas your bike with a minimum of fuss and splatter.

Easy to access 5V/2.4A USB power port mounts next to the left hand grip for convenient use. Plug in your phone, GPS, or other electronics to charge or power-on during your ride. Wiring and mounting is easy. Water-resistant design and operation. Fits 7/8" and 1" handlebars. Slender 13.5mm thickness for convenient mounting. 2.5"x4". Black.

Here’s a handy, inexpensive way to easily mount switches, accessories and other such farkle to your motorcycle. Find the desired mounting location and zip into place with the included heavy-duty mounting strap. (You may also use a worm-type stainless hose clamp, not included.) Includes 4 mounts, 8 straps and 8 pieces of shrink tube wrap. Place the shrink tube near the lock and it will grip your handlebars a lot tighter. 1/4" diameter mounting hole.

After a great trip you wash the bike and There It Is: big, rubbed-right-through-the-paint dull area, ...right where your pack, straps, and bungees went. ($$$, sh_t.) This anti-slip, padded, cut-to-fit foam covered mesh can save your bike’s paint from a thousand abrasions or scratches on your next trip. The most carefully loaded duffels and soft bags can ‘walk’ due to road and engine vibrations. Place this durable 3/16” thick reinforced pvc mesh between your bags, bungees and bike bodywork for maximum protection and increased load security, no matter how rough the road conditions. If you can predict a problem, you can prevent it. This versatile stuff is also great as a tool drawer liner in the workshop, an anti-skid sheet on a dashboard, or a vegetable bin liner in the fridge. Very durable, too. Black. 24” x 36”.

If you venture into terrain and trails off the road, you know the importance of carrying a towstrap to get back to civilization in the event of mechanical difficulties. What sets this apart is that it doubles as two 1400 lb. rated tie downs which can come in handy in case that guy (or gal) in the pickup you flag down is amenable to hauling your busted bike somewhere. Rolled up tight in their nylon bag, they measure just 8"×1.25", small enough to stow anyplace. Includes two 6'×1" adjustable cam nylon web straps with looped ends and 8" strap loop on cam buckle. Rollercam version uses Rollercam power strap technology for 10x greater tie-down force. Made in USA.

Additional Information/Resources:

A self-priming fuel transfer system. No matter where you are, this ultra compact system won’t leave you stranded for long. Throw away that length of gnarly old hose and safely siphon fuel from any gas-powered device without getting a mouthful of gas.

This is one siphon that doesn’t suck. Simply insert the self-priming end into any non-empty gas tank, and put the other end into the transferring container/carrying case (that works a heck of a lot better than a crinkled Mountain Dew can). A few up and down motions and you’ll be siphonin’ away. The handy stopper clip maintains siphoning even when in the “off” position, so there’s no need to begin the process all over again between container transfers to your tank. The included super soak towel quickly cleans up any excess spills and everything fits neatly back into the transfer container/carrying case. Carrying case is 10.1"×2.6"×1.25" and holds 1/8 gallon of gas. Siphon is 68" long. Entire system weighs less than 4 oz.

It’s a bright taillight…until you hit the brakes. Then, it flashes four times fast—pauses—three flashes a little slower—pauses—two more real slow, and it’s on full time as a stop light. The entire flash/pause sequence takes 4 seconds and repeats each time you re-apply the brakes. This complex pattern is commonly and intuitively recognized as a deceleration warning. The bulb’s reliable digital electronics are all contained inside the bulbs base. Choose from widely available, easily replaceable “G-4” halogen bulb version (easy to carry spare bulb is also included), upgrade to long life LED option, or select the dual ballast CAN-bus compatible model for most modern BMW's. Fits standard 1157 dual filament brake/taillight bulb sockets. Legal disclaimer: May not be approved for use in all states.

NOTE: Spare LED element only.

It’s a bright taillight…until you hit the brakes. Then, it flashes four times fast—pauses—three flashes a little slower—pauses—two more real slow, and it’s on full time as a stop light. The entire flash/pause sequence takes 4 seconds and repeats each time you re-apply the brakes. This complex pattern is commonly and intuitively recognized as a deceleration warning. The bulb’s reliable digital electronics are all contained inside the bulbs base. Choose from widely available, easily replaceable “G-4” halogen bulb version (easy to carry spare bulb is also included), upgrade to long life LED option, or select the dual ballast CAN-bus compatible model for most modern BMW's. Fits standard 1157 dual filament brake/taillight bulb sockets. Legal disclaimer: May not be approved for use in all states.

It’s a bright taillight…until you hit the brakes. Then, it flashes four times fast—pauses—three flashes a little slower—pauses—two more real slow, and it’s on full time as a stop light. The entire flash/pause sequence takes 4 seconds and repeats each time you re-apply the brakes. This complex pattern is commonly and intuitively recognized as a deceleration warning. The bulb’s reliable digital electronics are all contained inside the bulbs base. Choose from widely available, easily replaceable “G-4” halogen bulb version (easy to carry spare bulb is also included), upgrade to long life LED option, or select the dual ballast CAN-bus compatible model for most modern BMW's. Fits standard 1157 dual filament brake/taillight bulb sockets. Legal disclaimer: May not be approved for use in all states.

Originally made as a spare tire lock for pickups and SUVs, this is a fast deploying and easy to carry cable lock that's ideal for moto-travel. Although the thick 12mm cable and Ace cylinder lock does not provide the ultimate heart-of-darkness bank vault security, this lock is so easy to use it’s perfect for everyday lockups.

When traveling it can be quickly stored as a straight length of cable…it lays perfectly along-side your duffel or your bikes frame. Has an o-ring sealed lock mechanism that keeps moisture out of the internals.

Additional Information/Resources:

These license plate holders state clearly 40, 50, 60, or 70 MPG followed by the popular phrase “one less car,” or more boldly “THIS IS MY CAR.” A 7.5"×5" durable plastic backing with drilled holes for mounting, the lettering is 0.65" high. Specify 40, 50, 60, or 70 MPG, THIS IS MY CAR, RIDE EVERYWHERE or RIDE EVERYDAY.40, 50, 60, or 70 MPG or THIS IS MY CAR #3396 $5.00 Ride Everywhere #3419 $5.00 Ride Everyday #3420 $5.00

This lock is made for police, fire, hospital, and airport security use, but is ideal for locking up your jacket, helmet, and tank or seat bags. Light, fast and easy to use. One end terminates in a no-scratch, vinyl booted, aluminum sleeve that protects a recessed Ace cylinder lock. The other end of the flexible, nylon covered, ‘7 over 7’ stainless steel aircraft cable, releases. The 4mm cable is hard to cut and small enough to thread through tight places. The lock is hard to break.

Cable/Chain Comparison (w/ and w/out locks)

Additional Information/Resources:

The 62" black nylon utility cord loops over the left grip to eliminate bending to retrieve. When you’re ready to go, just reel it in while comfortably saddled. Includes a “Remove Before Flight” ribbon so you’ll never accidentally leave it behind. Same black ultrasuede storage bag as the CFSP. Made in USA

Features

• Ultra-light and ultra-strong Carbon fiber.
• Parachute cord with hand-grip loop makes it easy to pull it up after you mount the bike.
• Red ‘remove before flight’ flag to remind you to pull it up before taking off.
• As ridiculous as you can imagine, but despite that, it works well.
• Looks cool, sells poorly, so you’ll probably never see another at any moto-gathering event.

This strong, light, easy to carry throttle and brake lock will scream like a banshee if anyone tries to move your bike. And carries in a jacket pocket! Illuminated blue LED light blinks when armed and the built-in high-precision tilt sensor shrieks out a 110dB alert (in 15 second intervals) if your bike is moved. Die-cast and thick high-strength resin body design is extremely resilient to cutting, prying and impact. Lever position lock adjusts to fit almost any bike. Keyed lock is covered by weatherproof dust cap. Includes 2 keys. Power supplied by 3 long-life button cell batteries (included). 6.5"x2.5"x2". Weighs 1lb 2oz.

They’re not kidding about the “Blaster” part. This horn generates a shattering 132 decibels and will likely get just about anybody’s attention, even if they happen to be ensconced in a giant SUV with a phone glued to their ear. And that, of course, is a good thing...we all know that stock motorcycle horns are at times rather underwhelming. Fix all that and let ‘em know you’re there with this important safety device. Available in High and Low tone versions. If you are using only one, go with the low tone. 12V. 10A. 3.5"×3.5"×2.5".

Compare Sounds:

3830 Freeway Blaster Horn (Low Tone):

3831 Freeway Blaster Horn (HighTone):

Beat the Evaporative Fuel Nozzles and top off your tank with relative ease with this lightweight, 1/8” thick, credit card sized tool. Durable ABS plastic prevents damage to the paint finish on your fuel tank. Unique teardrop shaped cut-out allows sliding over gas nozzle to depress and hold back the EFN boot while adding fuel to your tank. Won't slip off either. Works for filling gas cans too. Even if you don't live in a state with these booted nozzles, sooner or later you'll need one of these. Fits easily in your wallet, jacket pocket or tank bag. Prevents fuel filling frustration. 3.3"×2.2".

An amazingly clever, simple solution to relieve wrist fatigue on long rides. Installs over any throttle grip in seconds, no tools required. The patented smart-clip tension design locks easily into place against the brake lever to maintain your cruising speed, without the need to hold the throttle. Disengaging is as easy as returning the throttle to a closed position or giving the brake lever a squeeze. High-mile rides just got a little more comfortable. Two sizes: Small (7/8", for Street and Sport Bikes), Large (1", for Cruisers). Black.

Additional Information/Resources:

This heated grip kit is the most powerful one available.  Yet installs neatly and perfectly and easily under your bike’s original or aftermarket grips. This is our favorite for serious cold-weather riding situations and features two-stage heat control (HI/LO) with a convenient round rocker switch for quick adjustments on the go. The complete kit includes two adhesive-backed heating elements, a hi/lo switch, a shrink-wrap insulation layer for the clutch side of the handlebars, wiring and mounting hardware, and full instructions for an easy install. You’ll also find plenty of DIY install videos on YouTube.  With a total output of 40 watts on hi, while drawing only 3 amps, these deliver dependable warmth in really cold conditions without overloading your bike’s electrical system.

A flexible, adhesive, wrap-around heating element with printed-circuit-type elements that fit between the handlebar and grip, keeping your digits from turning into frozen turkey feet during cold weather rides. These have been a popular way to make any bike more all-season rideable for years. Installation is DIY easy, and there are plenty of YouTube tutorials to follow online. Includes two heating elements, wiring, resistor (for hi-low function, and an on/off, hi/lo switch. Effective way to have warm hands, which helps the rest of your body be warmer, too.  A great comfort as well as a safety enhancer. For 12V systems. On "hi" they draw only 2 amps and make 27-29 watts of hand-warming heat. Installation takes only about an hour on most bikes.